Friday, November 11, 2011

Basic Slow Cooker Tips and Delectable Roast Beef Recipes

!±8± Basic Slow Cooker Tips and Delectable Roast Beef Recipes

Slow cookers or crock pots are countertop electrical cooking appliances that maintain a low temperature for several hours. This enables cooking stew or pot roast without the need to check on it from time to time.

Amateur cooks will find it very easy to handle and maintain. All you need to do is to fill it up, and then turn it on. After several hours, dinner can be served. However, when using the slow cooker, there are some things you need to consider. It is best to get one that has a removable liner, making it very easy to clean. If you already have one with a non-removable liner, you can just use a cooking bag; then, use cooking spray on the inner liner.

Make sure you only fill your slow cooker ½ up to 2/3 full. The food will not be cooked properly if filled to the brim. However, if the liquid and food level is a bit lower, it will cook quickly.

You will find that the food along the bottom part of the slow cooker are moister and become cooked faster. This is because they are continuously immersed inside the simmering liquid. Since fats have a tendency to melt and cook easily when heated for a long time, resulting to an unpleasant texture, it is best to trim the excess fat formed and remove the skin from poultry.

During the last 30 minutes of cooking time, you can remove the lid and cook it on high to thicken the juices and add more flavors. It is best to cook on High during the 1st hour of cooking so that the temperature would easily reach 140 degrees, ensuring food safety. When you are almost done with your cooking, you can turn the dial to Low.

Do not place frozen foods inside your slow cooker. It should be defrosted first before cooking it. This way the temperature would easily reach 140 degrees. It also protects the appliance from being damaged.

Use cheaper cuts of meat because this requires about 8 hours of low cooking. Aside from being able to save money, they have less fat, moist and they result to more tender meats.

Ground meat should be cooked inside a skillet prior to cooking it in the slow cooker. If you will be cooking seafood in a slow cooker, this should be added in the last hour of cooking; otherwise, it will become overcooked and it will showcase a rubbery texture. Take note, 1 hour on high setting is actually equal to 2 hours on low setting.

Only use small amounts of Tabasco sauce and cayenne pepper because they become bitter when they are cooked for a long time. It is best to add them during the end of your cooking time.

Make sure you only add tender vegetables such as mushrooms, tomatoes and zucchini on the last 45 mins. of cooking time. This way, you will not overcook them.

Dairy products, on the other hand, must be added only during the last 30 minutes of cooking time.

Prior to storage, take out cooked food from the slow cooker or liner. Since the slow cooker's liner is composed of thick material, cooked food will not be able to cool down quickly so as to prevent the growth of bacteria.

Only stir in spices during the last hour of cooking time. If you cook this for a long time, it will lose its flavor.

Carefully follow the layering instructions. Since vegetables are not cooked as easily as meat, you need to place them in the bottom of your slow cooker.

If you are using low temperature, do not lift the lid when you stir. This is because the heat will escape and extend the cooking time to 30 minutes more. You can check the cooking progress by spinning the cover so that the condensation would fall off, giving you a chance to look inside your slow cooker.

Here are some of the best Roast Beef Recipes you can cook with your slow cooker:

Roast Beef a la Mushroom Soup

Ingredients are 1 can of Cream of Mushroom Soup, small to medium shoulder or chuck of beef roast, 1 can of French Onion Soup, a dash of pepper and ½ can of water (for cleaning the soup can).

Procedure:

Place the first 3 ingredients inside your slow cooker. Mix the ingredients until thoroughly blended. Sprinkle a dash of pepper. Put the settings on Low and allow cooking for the entire night. The next day, remove the meat and prepare your gravy. If your gravy seems too thin, add about 1 to 2 tsp. of cornstarch with ¼ cups of cold water. Set the cooker on high. Stir in the mixture to thicken and serve.

Roast Beef with Gravy

Ingredients are olive oil, 3 to 3 ½ pounds Boneless Rump Roast, 8 garlic slivers, salt and pepper. You will also need a meat thermometer. For the gravy, you will need some beef stock or red wine and corn starch.

Procedure:

One hour prior to cooking remove the roast from the refrigerator at put it in room temperature.

Using a sharp knife, you need to cut about eight small incisions around your roast. You will place one sliver of garlic on each incision. Place one tablespoon of olive oil around your roast and then sprinkle it with salt and pepper. Put your roast on the oven rack with the fatty side up and a drip pan over a rack under the roasting rack. This way, you will not be required to turn the roast.

Brown your roast at 375oF for 30 minutes. Then, put it on 225oF. It would still 2 to 3 hours to cook but if it starts to drip and is already brown externally, use your meat thermometer to check its temperature. After this, pull your roast from the oven once the temperature reaches 135 to 140oF. Place it on an aluminum foil for about 15 minutes and carve to serve.

For the gravy:

Take out the dripping pan from the oven. Place it on the stove top while it is on medium heat. Collect the drippings, add water, beef stock or red wine. This will loosen the drippings off the pan. Then, dissolve one tablespon of cornstarch with water and add this on the drip pan. Stir it quickly as the gravy thickens. You can also add some butter, salt and pepper. Aside from this, you can also add some fresh thyme.


Basic Slow Cooker Tips and Delectable Roast Beef Recipes

Where To Buy Lanikai Kohala

Monday, November 7, 2011

Angelcare Baby Monitor AC401 Review - Graco Baby Movement and Sound Monitor Deluxe

!±8± Angelcare Baby Monitor AC401 Review - Graco Baby Movement and Sound Monitor Deluxe

The Angelcare Baby Monitor Deluxe AC401 by Graco combines a quality sound monitor and a movement monitor in a single system. The under-the-mattress movement sensor pad detects your baby's slightest movements, even when sleeping, and sounds an alarm only if no movement whatsoever is detected for 20 seconds.

The Angelcare baby monitor also transmits all other nursery sounds and has a movement indicator light showing if movement is being detected.The Angelcare baby monitor offers an optional tic feature, it will tick if movement is detected.

The Angelcare movement and sound monitor deluxe offers parents peace of mind and a good nights sleep knowing that your precious baby's breathing patterns are being monitored around the clock. If you have any concerns about sleep apnoea or SIDS (Sudden Infant Death Syndrome) then this high quality sound and movement baby monitor should ease your worries. It is the only baby monitor available (outside of the hospital system) that every parent rates it an impressive 5 out of 5.

Additional features:

The nursery unit has a soft nightlight and room thermometer, it's temperature is displayed on the parents units, which can alert you when the temperature falls out of your pre-set range. The high-tech monitor enables all the units to share data and communicate with each other, if you change a setting on one parent unit that setting will automatically be changed on the other unit.

The Angelcare Baby Monitor comes with an out of range indicator, a parent's unit locator, optional voice activation and a color LCD on each Parent's unit which displays all of the data. The new Deluxe Angelcare model AC401 operates on both 900 MHz and 2.4 GHz frequencies. Its sound monitor operates on the 900 MHz frequency so there is no interference from 2.4 GHz equipment. The monitor has 8 channels to avoid interference and an 820' range.

Important Installation Requirements:

Sensor Pad: Place a 1/2" (6mm) masonite or plywood board measuring at least 16"x24" under the crib mattress for stability, this is essential for a spring base. The sensor pads are placed on top of the board below the crib mattress. The sensor pads work under any standard crib mattress.

Nursery Unit: The nursery unit should be at least 38cm from the crib at all times.

Parent Unit Settings: Only 1 parent unit needs to be programmed as the 2nd unit automatically picks up the same settings of the 1st unit.

Tic, Movement and Sound Features:

The 'tic' feature is represented by a pendulum on the parent unit which monitors movement on the sensor pads, it makes an audible ticking noise.

The 'face' represents sound being monitored from the baby's room.

The 'Waves' display are for movement. The sensor pads a very sensitive to movement.

There are 5 different combinations to choose from, sound only, movement only, sound and movement, movement and tic, also tic, sound and movement.

There is also an option of continuous sound reception or voice activation.

Alarm and Vibration:

The movement sensor pads that are placed under the mattress, have adjustable sensitivity, a dial at the back of the nursery unit adjusts the sensitivity of the sensor pads. A loud alarm sounds on the parents unit and the nursery unit if NO movement is detected after 20 seconds. The alarm is loud enough to wake even a heavy sleeper since the situation could be life threatening for the infant. Often the baby is also awoken from the alarm too, potentially avoiding a critical situation.

The movement monitor is used on average for 14 months, however the sound monitor can be used for as long as you find necessary.

There are 3 alarm settings: Alarm only, Vibration only or Alarm and Vibration.

Room Temperature Monitoring: The room temperature in the baby's room is monitored on the parent unit, it's represented by a 'sun and snowflake' icon. It can be programmed as a temperature range - lowest temperature setting to highest, the alarm will sound if the temperature moves outside of your pre-set conditions.

Hold Feature: To avoid the alarm going off when you pick up your baby, you must either remember to turn off the monitor or use the 'Hold' feature. The hold feature doesn't seem to be used as much as turning off the monitor, but I would suggest it's a safer alternative as it's easy to forget things as a sleep deprived new mother, like turning the monitor back on. The Hold feature can be activated by holding down the 'hold button' until a flashing 'H' appears, this allows you to pick up your baby without turning off the monitor. The parents unit will beep every minute as a reminder that the monitor is on hold.

Extra Settings:

Mute:The monitor can be muted temporarily for 2 minutes.

Reception: There are 8 different channels available to avoid static and interference. To avoid feed-back keep both the parents unit and nursery unit at least 3m (10feet) apart, however static may occur if the 2 units are too far apart, they must also be set to the same channel to avoid distortion/interference.

Paging: To locate the parents unit press the clear button on the front of the nursery unit. This is useful when you have been walking around with a parent unit and left it somewhere.

How to avoid false alarms:

Turn off nursery unit or put parent unit on-hold before picking up your baby from the crib.

Don't tuck any bedding under the mattress between the sensor pad and mattress.

Sensor pad must rest on a completely rigid surface.

The Angelcare Baby Movement and Sound Monitor Deluxe AC401 provides crisp, clear audio monitoring and very sensitive movement monitoring of your baby, you can rest easily knowing that your baby's breathing motions are being closely watched when you aren't able too, giving you that long awaited good nights rest.

The Angelcare Baby Monitor is of exceptional high quality, the next step up in quality to monitor a baby's breathing, are the hospital grade monitors found in neonatal intensive care units. If you have been considering using an 'audio only' baby monitor, I would highly recommend upgrading to the Angelcare Baby Movement and Sound Monitor Deluxe, you wont regret the extra cost for the peace of mind it will give you when it comes to the health and safety of your precious baby.


Angelcare Baby Monitor AC401 Review - Graco Baby Movement and Sound Monitor Deluxe

Charmin Printable Coupons For Sale Skylight Tubular Top Quality


Twitter Facebook Flickr RSS



Fran�ais Deutsch Italiano Portugu�s
Espa�ol ??? ??? ?????







Sponsor Links